Close search
  • Home
  • Our Range
  • About Us
  • Distributors
  • Get in touch
Go to description
Go to description
Go to description
Go to description
Go to description
Go to description

XSPLT.1 4Ohm Professional Array Dedicated Slot Type Bullet Tweeter Single 200w RMS


World RRP: £36.95

Category: Tweeters & Horns

Product code: XSPLT.1

In Europe the slot type tweeter is an important development because the advanced nature of the installations and the sheer size of them means that often the tweeter installations end up taking up most of the available space just to keep up with the bass. These array dedicated tweeters are the answer, with highly directional wave guide you can use multiple together for increased performance and outstanding presence both physically and audibly! The tweeters are supplied for safety with 3.3uf capacitors which will result in a crossover frequency of 12Khz when connected in a 4 ohm configuration which is obviously not the optimum but if you're bothering to read this specification and understand what 12Khz is then we are not adding these capacitors for you... (wink) We recommend that you set up for a minimum frequency of 1.5Khz at any appreciable level of volume and adjust to taste. If you really want to use all the performance then obviously you'll need to increase the crossover frequency to get the power handling with 4/5Khz being a popular crossover point.

Technical Highlights


  • Extreme Slot Type Tweeter
  • Best Choice For SPL
  • Supplied With 3.3uF Capacitors Fitted For Safety - Proper Performance Requires Tailored Crossover Point
  • Spade Terminals
  • Pro Audio Inspired Features For Extreme SPL
  • Extra Wide Frequency Range
  • High Performance Magnet

Series


SUPPORT CREW

What's In The Box?


  • 1 x Slot Type Tweeter
What's In The Box?

Version History


In March 2017 a request was made from our Greek distribution for a high end slot type tweeter which would keep up with their enormous bass systems. It turned out to be quite difficult to engineer with several factories unable to complete the task. After some development an excellent, very powerful product was developed. Dimensionally the unit is large but should fit in deep 4 inch apertures or obviously is open to custom installation. V1 – The first batch is built to a high standard and is supplied with 3.3uf capacitors to enable immediate connection to a full range supply at 6db/oct with a 12k (!) crossover at 4 ohms. This stops uninformed clients from damaging the units even if they connect in an 8 ohm configuration (6k). We note that some improvements can be made for V2 which will be: 1) Print the Bassface logo on the front panel of the tweeter. 2) Correct the spelling mistake on the box of the product (XPLT.1) on the small detail panel. 3) Include a rubber gasket for mounting. 4) Improve the protection around the packaging for shipment to mail order end users. Obviously none of these things are performance related and XSPLT.1 is a terrific product in V1 form right out of the box.

Key Facts


Product Category Tweeters & Horns
Version 1
Series Support Crew
First Added 29/03/2017
Last Modified 02/09/2021
Barcode 680044771786
Production Status Discontinued
Product Net Weight (g) (For Pairs/Sets/Major Parts) 1400
Product Height (mm) 70
Product Length (mm) 104
Product Width (mm) 104
Complete Product Pack Weight (g) 1460
Warranty (Months) - Private Enjoyment Use Only 12
Sold As Single

Related products


Tweeter Data


Voice Coil Diameter (mm) 45
Overall Depth (mm) 70
Mounting Depth (mm) 58
Front Protrusion From Mounting Plane (mm) 12
Overall Diameter (mm) 115
Magnet Diameter (mm) 90
Installation Cut-out Diameter (mm) 92
Magnet Type Y30
System Maximum Power (Watts) (Using Pair Of Tweeters Not Necessarily Included) 800
System RMS (Watts) (Using Pair Of Tweeters Not Necessarily Included) 400
System Maximum Power (Watts) (Single Tweeter) 400
System RMS (Watts) (Single Tweeter, 4Khz/12DB Oct X Over) 200
Frequency Response (Hz) 1500-20000
Impedance (Ohm) 4
Sensitivity (db/1Wm) 103